Field guide.
A first pass through a router job, from the size of the board to the file you open in gSender.
Set up the stock
Enter the width, height, and thickness of the actual board. Choose a point for XY zero and decide whether Z zero is on top of the stock or on the spoilboard. Match those choices when setting up the machine.
Draw or bring in artwork
Draw shapes, edit nodes, or add lettering directly on the board. For existing work, import an SVG or DXF. Convert text to outlines in an SVG before importing it. A bitmap can be traced into vectors.
Fields accept inches, millimetres, and fractions. Enter
1 1/2 in an inch field for a part an inch and a half
wide.
Plan the cuts
Select the vectors, open Toolpaths, and choose an operation. A pocket clears an area, a profile follows an edge, a drill operation makes holes, and a V-carve cuts lettering or other tapered detail. Set the bit and depth for each operation.
Use tabs to hold a cutout. Chipsy shows the tabs on the board and lets you drag them along the outline or enter their positions from the keyboard.
Inspect the preview
Open the cube view to orbit the simulated cut. The Cut so far slider shows intermediate passes. Switch back to 2D to see paths by bit and dashed rapid moves.
Export to gSender
Save G-code lists the bits in order and checks the job against the stock and machine settings. Resolve blocking problems before saving. Export one grblHAL file or split the output by tool.
Chipsy 0.1.0 has been tested in software. Physical cut checks on the AltMill are pending. Treat the bit-library feeds and speeds as starting values, and air-cut a new job before machining stock.